Brake pads
Braking force is generated through the friction between the brake pads and the brake discs. Even the best actuator caliper requires high-quality brake pads and discs to produce adequate braking force.
Brake pads can be categorized into three types based on materials: organic, semi-metallic, and sintered. Organic brake pads primarily use rubber and quartz as friction materials, combined with heat-resistant resin as a base, and are formed through compression molding. They are generally used as original equipment for most common motorcycles. Advantages include affordability, quiet operation, minimal wear on rotors, and sufficient performance for general riding conditions. However, they experience significant braking force decay under high temperatures and accelerated wear in extreme heat, making them unsuitable for prolonged aggressive driving.Semi-metallic brake pads incorporate metal components (typically iron or copper) at 15%-30% of the friction material composition. Vehicles using these pads may develop unusual noises after long storage, usually caused by rust on the metal components. This can be resolved by grinding off the rust during regular driving. Compared to organic pads, semi-metallic variants offer greater friction, better durability, and improved heat dissipation with reduced thermal fade. However, they produce more brake noise and cause greater rotor wear. They are cost-effective with balanced performance, commonly specified for sport bikes that balance daily commuting and short-term aggressive riding.Sintered brake pads derive their name from the manufacturing process where metal powders are pressed under high pressure at melting temperatures. These pads typically contain over 50% copper. Compared to semi-metallic pads, they provide superior friction, faster heat dissipation, and minimal thermal fade, maintaining strong braking force even in extreme heat. However, they are more expensive, cause greater rotor wear, and produce significant noise during regular braking. They are typically specified for high-displacement sport bikes, designed for extended aggressive driving environments.
Brake pads are categorized into six grades based on their friction levels, namely C, D, E, F, G, and H, with C being the lowest and H being the highest. Typically, brake pads are labeled accordingly. If there is only one letter, it indicates the friction level under normal conditions; if there are two letters, the first letter denotes the friction level at room temperature, while the second letter indicates the friction level at high temperatures.

