Brake fluid
The current classification of brake fluids generally follows the U.S. automotive safety technical regulations, prefixed with "DOT," including DOT3, DOT4, DOT5, and DOT5.1. China also has corresponding national standards with the prefix "HZY," where HZY3 corresponds to DOT3, HZY4 to DOT4, HZY5 to DOT5, and HZY6 to DOT5.1.
DOT3/DOT4/DOT5.1 are all alcohol-based brake fluids based on glycol ethers or borate esters, while DOT5 is a silicone-based brake fluid. DOT3/DOT4/DOT5.1 can be mixed with each other, but DOT5 cannot be mixed with the other three types. If using DOT5 brake fluid, you must first confirm that all components of the entire braking system are compatible with DOT5, and thoroughly clean the entire braking system's fluid lines before switching to DOT5.
Alcohol-based brake fluids are compatible with water and acetone, but their boiling point will decrease significantly after compatibility, which greatly affects their performance under high temperatures. Due to its chemical properties, such brake fluids will continuously absorb moisture from the environment during daily use, so the water content in brake fluid is regularly tested during vehicle maintenance. When exceeding certain thresholds, brake fluid must be replaced. Additionally, ethylene glycol exhibits a strong corrosive effect on paint, so precautions should be taken to prevent brake fluid splashes from contacting painted surfaces during fluid replacement. Currently, DOT4 has largely replaced DOT3 as the standard brake fluid for general motorcycles, while DOT5.1 is used as a brake fluid for high-performance motorcycles due to its superior performance characteristics.
Silicone-based brake fluid neither absorbs moisture from the environment nor corrodes paint, but it exhibits faster performance degradation and a significantly shorter replacement interval compared to alcohol-based counterparts. Due to its physical properties, it affects the operation of the ABS pump at low temperatures. Following the widespread adoption of ABS systems, DOT5 has been gradually phased out. It is now only used in specific racing fields.
Most vehicles utilize DOT3/DOT4/DOT5.1 alcohol-based brake fluids. It is recommended to use DOT5.1 brake fluid whenever possible under suitable conditions. Strict adherence to the brake fluid replacement procedure should be ensured, including complete air expulsion, proper torque tightening of fasteners, and prevention of splashing/dripping.

