How to prime a new motorcycle brake pump?

Sep 26, 2025

Leave a message

Olivia Taylor
Olivia Taylor
Olivia is a supply chain analyst at the company. She manages the procurement of raw materials and ensures the smooth operation of the production line. Her efficient supply chain management is essential for the company's timely delivery of customized products.

Hey there, fellow motorcycle enthusiasts! I'm a supplier of Brake Pump Motorcycle, and I know how crucial it is to have a well - primed brake pump on your bike. A properly primed brake pump ensures your safety on the road by providing reliable braking performance. In this blog, I'll walk you through the steps on how to prime a new motorcycle brake pump.

First things first, let's talk about why priming is so important. When you install a new brake pump, there's likely to be air trapped inside the system. Air is compressible, while brake fluid isn't. If there's air in the brake lines, it can lead to a spongy brake lever or pedal feel, and your brakes won't work as effectively as they should. Priming the brake pump gets rid of that air and fills the system with fresh brake fluid, giving you that firm and responsive braking you need.

Gather Your Tools

Before you start the priming process, you'll need to gather a few tools. You'll need a suitable brake fluid for your motorcycle (check your owner's manual for the correct type), a brake bleeder wrench, a clear plastic tube, a container to catch the old brake fluid, and some rags to clean up any spills.

Preparation

The first step is to make sure your motorcycle is in a safe and stable position. You can use a motorcycle stand to keep it upright. Next, locate the brake pump. On most motorcycles, the brake pump is mounted near the handlebars for the front brakes and near the footrest for the rear brakes.

Open the reservoir of the brake pump. You'll see a cap on top of it. Remove the cap carefully, and use a clean rag to wipe away any dirt or debris around the opening. This will prevent any contaminants from getting into the brake fluid when you're adding more.

Filling the Reservoir

Now, it's time to fill the reservoir with fresh brake fluid. Pour the brake fluid slowly into the reservoir, making sure not to overfill it. You want to leave some space for the fluid to expand as it heats up during normal operation. Keep an eye on the fluid level markings on the reservoir to get it just right.

Bleeding the Brakes

Bleeding the brakes is the key part of priming the new brake pump. This is where you'll get rid of the air in the system. Start by attaching one end of the clear plastic tube to the bleeder valve on the brake caliper. The other end of the tube should be placed in the container to catch the old brake fluid.

Motorcycle Clutch Master Cylinder ZX-1006Brake Master Motorcycle ZX-1013

Use the brake bleeder wrench to loosen the bleeder valve slightly. You don't want to remove it completely, just enough to let the air and fluid out. Have a friend sit on the motorcycle and squeeze the brake lever (for front brakes) or press the brake pedal (for rear brakes) slowly and firmly. As they do this, you'll see air bubbles and old brake fluid coming out through the tube.

Keep squeezing the brake lever or pressing the pedal a few times, and each time, open the bleeder valve a bit to let more air and fluid out. You'll notice that the bubbles start to get smaller and eventually stop. This means that most of the air has been removed from the system.

While you're bleeding the brakes, keep an eye on the fluid level in the reservoir. As you're pushing fluid out of the system, you'll need to add more to the reservoir to prevent it from running dry. If the reservoir runs dry, you'll have to start the bleeding process all over again because air will get back into the system.

Tightening the Bleeder Valve

Once you're sure that all the air has been removed from the system, tighten the bleeder valve using the brake bleeder wrench. Make sure it's tight, but don't over - tighten it, as this could damage the valve.

Testing the Brakes

Now that you've bled the brakes, it's time to test them. Have your friend sit on the motorcycle again and squeeze the brake lever or press the brake pedal a few times. The brakes should feel firm and responsive. If they still feel spongy, you may need to repeat the bleeding process to get rid of any remaining air.

Final Checks

After testing the brakes, check the fluid level in the reservoir one more time. Top it up if necessary, and then replace the cap on the reservoir. Wipe away any spilled brake fluid with a clean rag.

Our Products

As a Brake Pump Motorcycle supplier, we offer a wide range of high - quality brake pumps. For example, we have the Motorcycle Master Cylinder ZX - 1046, which is known for its durability and excellent performance. Our Motorcycle Clutch Master Cylinder is also a popular choice among motorcycle riders. And if you're looking for a reliable brake master for your motorcycle, check out our Brake Master Motorcycle.

Contact Us for Purchasing

If you're interested in our products or have any questions about priming a new motorcycle brake pump, feel free to reach out to us. We're always happy to help you with your motorcycle brake needs. Whether you're a professional mechanic or a DIY enthusiast, our products are designed to meet your requirements.

References

  • Motorcycle owner's manuals
  • Various motorcycle repair guides available in the market

So, there you have it! Now you know how to prime a new motorcycle brake pump. It may seem a bit complicated at first, but with a little practice, you'll be able to do it like a pro. Remember, proper maintenance of your motorcycle's brakes is essential for your safety on the road.

Send Inquiry